How to use a computer embroidery machine as a beginner？

People who have used a computer embroidery machine will feel that this machine operates well, but those who have not will be confused. Before starting your job, you should know what is a computer embroidery machine？                                                                                                                                                The Computer embroidery machine is a machine that can design the pattern in advance, then input the data into the machine, and the machine can automatically embroider the pattern you set. I am doing this part-time job now, and I'd like to share with you how to use this kind of sewing machine.

Tools/materials                                                                                                      

Embroidery machine, Embroidery thread, Needle, Embroidery Stabilizer             

Step1                                                                                                                      

First, input the data into the machine, adjust the approximate starting position, first empty, determine whether the position set is appropriate. If appropriate, directly back to the origin, exit empty walk, click "direct embroidery" to start.        

Step2                                                                                  

After the machine is running, it is necessary to rewind the empty lock core below in time for later use. Almost two or three consecutive lock core no line, embroidery to the bottom position, you can suspend the machine, all replacement lock core. Then replace the lock core, re-winding.                            

Step3                                                                                                                      

One thing you always have to watch out for in this job is broken threads. The intelligent part of the machine is that the light will turn on when the thread is disconnected and the machine will stop automatically. Then, after you have rewired the thread, push the lever and the machine will continue running.            

Step4                                                                                                                      

Keep an eye on whether the embroidery thread is running out. If close to used up, connect it to the source, then pull the new thread out and re-perforate it. If you do not find that the thread is used up, you need to re-perforate, very troublesome. If you make a mistake, the machine will often stop automatically.       

Step5       

Splints are tiring, too. First，you need to lay a layer of paper on the frame and secure it. Then put the cloth on and secure it. This is done simultaneously with the input data. But you only need to input the data once, this should be in each frame after the patterned embroidery, re-splint fixed.

Note                                                                          

Apply line oil and machine oil twice every day, which can help the machine run better, not easy to break the thread, and can improve work efficiency.                                                                         

Final words                                                                       

That's all I want to share with you. Feel free to discuss and share your tips in the comments. If helpful, welcome to Share on your social media to make more people can see it.